TAI
: Temps Atomique International
GPS
: The raw GPS time as transmitted by the GNSS satellites (as of July, 2015,
this is currently 17 seconds ahead of UTC time).
If GPS or TAI time is used, then the proper timescale offsets must be set on the
MANAGEMENT > OTHER > Time Management
page. Local timescale allows a Local
Clock to apply a time offset for Time Zone and DST correction.
A
Local Clock
can be set up through the
Time Management
page: This option
will appear under the name of the local clock you have set up. See for more
information. Local timescale allows a Local Clock to apply a time offset for Time
Zone and DST correction.
The incoming input time information may be provided as local time, but System
Time may be configured as UTC time, so internal computations need to be per
formed. With the Timescale field set to “Local”, select the name of a previously cre
ated Local Clock. The Time Zone and DST rules, as configured in the Local Clock
will be applied to the front panel time display. See for more information on Local
Clocks.
Baud Rate
: Determines the speed at which the output port will operate.
Data Bits
: Defines the number of Data Bits for the output port.
Parity
: Configures the parity checking of the output port.
Stop Bits
: Defines the number of Stop Bits for the output.
340
NetClock User Reference Guide
APPENDIX
Summary of Contents for NetClock 9400 Series
