4.
Enter the required information into the fields:
Host
: The IP address for the server to be used as host.
Min Poll Interval
: Select a value from the drop down (the default is 3 (8s).
Max Poll Interval
: Select a value from the drop down (the default is 3 (8s).
For both NTP Peers, and NTP Servers the Minimum and Maximum Poll rate for
NTP packets can be configured. Both NTP Peers and NTP Servers support either
manually configured Symmetric Key-ID/Key string pairs or the use of Auto-Key.
However, these choices are mutually exclusive and must be
identically con
figured
on both the NetClock and the NTP Peer or NTP Server. If the Symmetric
Key-ID/Key string pair method is selected the Key-ID must be first defined on the
Symmetric Key page.
Enable Symmetric Key
: Click the checkbox to enable/disable Symmetric Key. See
also: "Configuring NTP Symmetric Keys" on page 118.
Note:
Before you can edit the
Key
field, you must set up
Symmetric
Keys
through the
Actions
Panel. See
"NTP: Symmetric Keys (MD5) "
on page 118
. Conversely, you may check the
Autokey
box below
the
Key
field.
Enable Autokey
: Click the check box to enable/disable Autokey. See "NTP
Autokey" on the next page for more information on Autokey.
2.15 Configuring NTP
CHAPTER
2
•
NetClock User Reference Guide
Rev.
16
111
Summary of Contents for NetClock 9400 Series
