2.
Navigate to the
INTERFACES > OPTION CARDS
drop-down menu, and click the list
entry of the option module identified above. The option module’s Status Summary panel
opens:
All the inputs and/or outputs of this option module are listed in the Status Summary panel.
In accordance with the Signature Control setting, and the Lock Status, the current signal state for
an
output
is indicated as:
ENABLED
(green); or
DISABLED
(orange)
The current state of an
input
signal is indicated as:
VALID
(in green); or
INVALID
(in red)
The Status Summary panel will be refreshed automatically every 30 seconds. Click the
Refresh
button (circling arrows) on the right to refresh the status instantaneously. A slight refreshment
delay is normal (the duration depends on the configuration of your system.)
5.2.3.5
Verifying the Validity of an Input Signal
The
HOME
page of the NetClock Web UI provides quick access to the status of all inputs via its
Reference Status
panel.
NetClock User Reference Guide
347
APPENDIX
Summary of Contents for NetClock 9400 Series
