Configuring Multicast Mode
To enter Multicast mode, perform the following steps:
1.
In the
GB PTP
Edit window, navigate to the
Advanced
tab.
2.
Select the
Multicast Sync
checkbox.
3.
Select the
Multicast Sync Rate
from the drop-down list.
4.
Select the
Multicast Announce Rate
from the drop-down list.
Configuring Unicast Mode
To enter the Unicast mode, perform the following steps:
1.
In the GB PTP
Edit
window, navigate to the
Advanced
tab.
2.
Confirm that
Unicast Sync
is checked. The 1204-32 PTP module should always respond
to unicast negotiations.
Configuring Minicast/Hybrid Mode
To enter the Minicast/Hybrid mode, perform the following steps:
1.
In the GB PTP Edit window, navigate to the
Advanced
tab.
2.
Select the
Multicast Sync
checkbox.
3.
Select the
Multicast Sync Rate
from the drop-down list.
378
NetClock User Reference Guide
APPENDIX
Summary of Contents for NetClock 9400 Series
