Note:
By default,
is the address in the
sysContact field of the SNMP Status panel of the SNMP Setup page.
2.14.8.1 SNMP V1/V2c
SNMP V1 is the first version of the SNMP protocol, as defined in the IETF (Internet Engineering
Task Force) RFCs (Request for Comments) number 1155 and 1157. SNMP V2c is the revised
protocol, but it also uses the V1 community based administration model.
Creating Communities
1.
Navigate to
MANAGEMENT > NETWORK: SNMP Setup
.
2.
In the
SNMP V1/V2
panel click the PLUS icon in the top-right corner.
3.
The
SNMP V1/V2c Settings for Access
window will display:
4.
Enter the required information in the fields provided
The
IP Version
field provides a choice of IPv4, IPV6 or both IPv4 and IPv6 (=
default).
The choices offered below will change in context with the choice made in the
IP
Version
field.
If no value is entered in the
IPv4
and/or
IPv6
field, NetClock uses the system
default address.
SNMP
Community
names should be between 4 and 32 characters in length.
88
CHAPTER
2
•
NetClock User Reference Guide
Rev.
16
2.14 Configuring Network Settings
Summary of Contents for NetClock 9400 Series
