Spectracom Corporation
Model 9289
NetClock/NTP Network Time Provider Instruction Manual
3-11
During initial configuration, you will be prompted to enable or disable and enter, as necessary,
various settings and addresses. The include the following:
Hostname:
This is the network hostname that identifies the NetClock.
DNS Server:
This is the IP address of the DNS server (if any).
DHCP Setting:
This enables or disables DHCP. This must be set for IPv4 and IPv6. The
NetClock always generates a static IPv6 address in addition to the dynamic
IPv6 address(es).
Gateway:
When the gateway IP is disabled on the product, the unit cannot be accessed
from subnets outside the local subnet. When enabled, the IP address of the
subnet's gateway must be specified. The default is disabled.
IP Address:
This is the unique 32-bit static address assigned to the product. The default
address is 10.10.200.1
Figure 3-13: Initial Configuration using the CLI
Summary of Contents for 9289
Page 18: ...Model 9289 Spectracom Corporation NetClock NTP Network Time Provider Instruction Manual 1 8...
Page 36: ...Model 9289 Spectracom Corporation NetClock NTP Network Time Provider Instruction Manual 2 18...
Page 154: ...Model 9289 Spectracom Corporation NetClock NTP Network Time Provider Instruction Manual 3 118...
