Spectracom 9289, Instruction Manual

Page: 21 / 198

Spectracom Corporation Model 9289
NetClock/NTP Network Time Provider Instruction Manual 2-3
Data Output Port Available From Time Zone
Offset for Local
Time
Automatic
Daylight Saving
Time Adjustment
Capable
Additional Notes
Network Time
Protocol (NTP)
Ethernet port on front panel NOT AVAILABLE NO NTP is always UTC. Must set
Local time/DST correction on
each PC via the Date/Time
properties window.
Data Format 0
Remote/Serial on rear panel 00-23 Hours YES None
Data Format 1
Remote/Serial on rear panel +/-12:00 YES None
Data Format 2
Remote/Serial on rear panel NOT AVAILABLE NO Data Format 2 always reflects
UTC. It can’t be configured as
local time.
Data Format 3
Remote/Serial on rear panel +/-12:00 YES None
Data Format 4
Remote/Serial on rear panel NOT AVAILABLE NO Data Format 4 always reflects
UTC. It can’t be configured as
local time.
Data Format 5
Remote/Serial on rear panel +/-12:00 YES None
Data Format 7
Remote/Serial on rear panel NOT AVAILABLE NO Data Format 7 always reflects
UTC. It can’t be configured as
local time.
Data Format 8
Remote/Serial on rear panel 00-23 Hours YES None
Data Format 90
Remote/Serial on rear panel NOT AVAILABLE NO Data Format 90 always reflects
UTC. It can’t be configured as
local time.
Table 2-1: Time Zone Offsets available for Data Outputs