Spectracom 9289, Instruction Manual

Page: 49 / 198

Spectracom Corporation Model 9289
NetClock/NTP Network Time Provider Instruction Manual 3-13
3.2.3 Default and Recommended Configurations
The factory default configuration settings were chosen for ease of initial setup. Refer to the
recommended settings listed here as applicable for your unit.
Configuration Default Recommended Where Enabled
HTTP Enabled Disabled
Web User Interface
or Command Line
Interface
HTTPS
Enabled
– Using customer-generated certificate and key or default Spectracom
self-signed certificate and common public/private key SSH/SCP/SFTP
enabled with unit unique 1024 bit keys
Web User Interface
SNMP Disabled
Disabled or
Enabled with:
– SNMP v3 w/ encryption*
Web User Interface
NTP
Enabled
– With no
MD5 Values Entered
Enabled
– Use MD5 authentication with
user-defined keys
Web User Interface
Daytime Protocol Disabled Disabled Web User Interface
Time Protocol Disabled Disabled Web User Interface
Command Line Interface
Console Port
Available
– Unless dial-out modem connected
(uses this port)
Available Not Applicable
Telnet Enabled
Disabled
– Use SSH instead
Web User Interface
SSH Enabled (default keys provided) Enabled Web User Interface
File Transfer
FTP Enabled
Disabled
– Use SFTP or SCP
Web User Interface
SCP Available Available Not Applicable
SFTP Available Available Not Applicable
*We recommend secure clients use only SNMPv3 with authentication for secure installations.
Table 3-2: Default and Recommended Configurations