Spectracom 9289, Instruction Manual

Page: 171 / 198

Spectracom Corporation Model 9289
NetClock/NTP Network Time Provider Instruction Manual 6-1
6 Serial Setup Interface Commands
The NetClock can be configured using the serial setup interface port and a terminal emulation
program as discussed in Section 3.2. At the Command Line Interface (CLI), the user can
manage files and configure product settings.
The available CLI commands are as follows:
time - time
reboot - reboot [app]
log - log COMMAND OBJECT [ HANDLE ]
option - option COMMAND [OPTION | PRODUCT] [VALUE]
ltc - ltc COMMAND [INDEX | NAME] [...]
net - net COMMAND [Arguments]
sys - sys COMMAND [Arguments]
mdo - mdo COMMAND [Arguments]
ser - ser COMMAND SERIAL [Arguments]
rem - rem COMMAND REMOTE [Arguments]
frq - frq COMMAND INDEX [Arguments]
One additional command,
help
, displays the available commands at the CLI. Typing
help
and a
specific command (for example,
help time
, or
help option
) and then pressing the enter key
displays detailed information about the command.
NOTE: Commands typed at the CLI are case-sensitive. All terms and commands entered
must be lower-case.
6.1 time
help time
Use the 'time' command to read the current system date and time.
USAGE: time
6.2 reboot
The reboot is used to warm-boot the unit without having to disconnect or reconnect the power
supply. The reboot command is intended only for administrators, and is available at the admin
security level.
NOTE:
This command provides a convenient way to remotely update application software in
that the unit will automatically execute the most recent image in /sys/bin/.
help reboot
This command is used to immediately reboot a unit.
The 'app' option is used to restart the application. Normally the
unit reboots to the application, unless the optional parameter is
specified to 'bootloader' which it will reboot to the bootloader.
USAGE: reboot [app]
app - Reboot to application.