Spectracom Corporation
Model 9289
NetClock/NTP Network Time Provider Instruction Manual
6-3
6.5
ltc
The ltc command is used to create up to five Local clocks. Local clocks allow many of the
output ports to be able to provide time data as local time instead of just UTC time. This
command requires admin level login.
help ltc
The 'ltc' group of commands are used to manage the local time clocks.
USAGE: ltc COMMAND [INDEX | NAME] [...]
COMMAND = {disp | create | delete | tz | dst}
disp - Displays information about the local clock.
create - Creates a new local clock. Multiple consecutive
spaces in the name will be reduced to a single space
delete - Deletes a local clock at the specified index.
tz - Assigns a new time zone offset for the local clock.
dst - Assigns a new daylight saving rule to the clock.
6.6
net
The command,
net
, is used to configure the network interface. The
net
command consists of a
set of subcommands that are used to get, set or change each individual network setting. Some
of the network settings require admin level security in order to set or change them.
help net
The 'net' group of commands are used to manage network interface
USAGE: net COMMAND [Arguments]
COMMAND
config - Configure IP settings.
show - Displays network configurations.
daytime - Enable/disable Daytime.
time - Enable/disable UNIX time.
telnet - Enable/disable Telnet.
ftp - Enable/disable FTP
http - Enable/disable HTTP.
https - Enable/disable secure HTTP.
ssh - Enable/disable SSH.
6.7
sys
help sys
The sys group of commands are used to retrieve information about the
system.
USAGE: sys COMMAND [Arguments]
COMMAND
mem - Display memory information. Use v for verbose mode.
Summary of Contents for 9289
Page 18: ...Model 9289 Spectracom Corporation NetClock NTP Network Time Provider Instruction Manual 1 8...
Page 36: ...Model 9289 Spectracom Corporation NetClock NTP Network Time Provider Instruction Manual 2 18...
Page 154: ...Model 9289 Spectracom Corporation NetClock NTP Network Time Provider Instruction Manual 3 118...
