Chapter 2 — Initial Configuration
Configure the Verde Management Port
September 2017
User Guide
—
Spectra Verde Array
40
C
ONFIGURE
THE
V
ERDE
M
ANAGEMENT
P
ORT
The
default
address
of
the
Verde
management
port
is
set
to
10.0.0.2
with
a
netmask
of
255.255.255.0
.
If
your
network
is
already
using
this
IP
address,
or
you
want
to
configure
a
different
IP
address
for
the
management
port,
use
the
Verde
master
node
console
to
configure
the
Verde
management
port
IP
address.
If
you
do
not
want
to
change
the
default
management
port
IP
address,
skip
to
.
Note:
Using
the
Verde
master
node
console
is
the
recommended
way
to
change
the
Verde
management
port
IP
address.
If
you
cannot
use
the
console,
see
for
information
on
alternate
methods.
1.
Connect
a
monitor
and
USB
keyboard
to
the
Verde
master
node.
See
to
locate
the
monitor
and
USB
connectors.
The
Console
screen
displays.
2.
Press
CTRL-N
.
The
Configure
Management
Network
Interface
screen
displays.
Figure 13
The Console screen.
Figure 14
The Configure Management Network Interface
screen.