Spectra Logic Spectra nTier300, Installation Manual

Page: 29 / 88

Rackmounting the nTier300 VTL
29
Install the nTier300 VTL into the Rack
1. Lift the nTier300 VTL and slide it onto the rails in the rack until the mounting ears
on the front of the chassis fit against the rack, with the mounting ear screw holes
directly over the clip nut holes (see Figure 2-16).
Warning:
The nTier300 VTL weighs approximately 54 lb. (25 kg) without
drives installed. Use extreme caution when moving it. Always
use two people, one on each side, when lifting or moving it.
Warnung:
Die nTier300 VTL wiegt ca 25 kg., ohne Laufwerke installiert.
Verwenden Sie extreme Vorsicht walten lassen, wenn sie
abwandern. Benutzen Sie immer zwei Personen, eine auf jeder
Seite, beim Heben oder Fortbewegen.
Caution:
A fully loaded chassis is heavy. Most of the weight is toward the
front of the chassis.
Figure 2-16 Slide the chassis into the rack.