Spectra Logic Spectra nTier300, Installation Manual

Page: 21 / 88

Unpacking the nTier300 VTL
21
Inventory the Components
Unpack and identify the components that shipped with the nTier300 VTL using the
following table for reference.
Component Description
Rack mounting kit Included in the accessory box. The rack mounting kit includes all the
components required to mount the nTier300 VTL in a standard 4-post,
19-inch rack.
Antistatic
wristband Included in the accessory box. An antistatic wristband to be worn when
handling the disk drives.
Power cords Included in the accessory box. Three power cords are provided with the
standard nTier300 VTL configuration (for either 110 VAC or 220 VAC
operation). See
Power Cord Specifications on page 69 for information
about the power cords.
Drives The number of drives depends on the configuration you ordered. Each
drive is mounted on a drive sled.
Note: Any drive blanks are shipped pre-installed.
Front cover and
keys The front cover protects the drives and prevents unauthorized access.
Software licenses,
software activation
keys, and
documentation The following documentation, licenses, and Spectra license keys are
included in the accessory box:
ƒ
A license key for the nTier Deduplication VTL software
ƒ
Spectra nTier300 VTL Deduplication VTL documentation:
ƒ
Implementing nTier Deduplication
ƒ
Spectra nTier300 Virtual Tape Library Appliance Installation Guide
(this guide)