Spectra Logic Spectra nTier300, Installation Manual

Page: 19 / 88

Unpacking the nTier300 VTL
19
Unpack the Components
Save all the original packing materials in case it is necessary to ship or move the
nTier300 VTL later.
1. Use scissors to cut away the plastic wrap surrounding the nTier300 VTL shipping
box.
2. Check the Tip N Tell
™
and Shockwatch
®
indicators to ensure that the nTier300 VTL
has not been improperly handled, before proceeding (Figure 2-5).
Caution:
Do not unpack the nTier300 VTL or its drives if the Tip N Tell or
Shockwatch indicator has been tripped. Contact both the
shipping company and Spectra Logic to report the problem.
3.
Use scissors to cut the straps securing the nTier300 VTL box to the shipping pallet.
4.
Remove the outer lid from the shipping box (Figure 2-6).
Figure 2-5 Check Tip n Tell and Shockwatch.
Figure 2-6 Remove the outer lid.
Tip n Tell
Shockwatch
Outer lid