Chapter 2 – Installing the nTier300 VTL
22
Rackmounting the nTier300 VTL
Install the nTier300 VTL in a standard 4-post, 19-inch rack using 3 units (3U) of rack
space.
Warning:
If you are not installing any other equipment in the rack, install
the nTier300 VTL near the bottom of the rack to prevent the
rack from being top-heavy.
Warnung:
Wenn Sie nicht die Installation ein anderes Gerät im Rack,
installieren Sie die nTier300 VTL in der Nähe der Unterseite des
Schranks zu verhindern, dass der Schrank von der kopflastigen.
Before You Begin
Obtain the following tools and equipment:
#2 Phillips screwdriver, magnetic if available
Measuring tape (recommended)
Level (recommended)
Identify the location where you will install the nTier300 VTL.
Assemble the rack, if necessary.
Unpack the rack mount kit and identify the components:
Component
# Required
Use
2 rail assemblies
Mount chassis in rack.
Each assembly includes:
Rail
Slider
Extender plate
Bag labeled
1 RAIL
.
6 or more screws
Attach rail sliders to
chassis.
Rail assemblies
Small screws
Summary of Contents for Spectra nTier300
Page 1: ...Spectra nTier300 Virtual Tape Library Appliance Installation Guide PN 90990034 Revision B...
Page 8: ...Contents 8 Notes...
Page 36: ...Chapter 2 Installing the nTier300 VTL 36 Notes...
Page 52: ...Chapter 3 Using the nTier300 VTL BlueScale Web Interface 52 Notes...
