Spectra Logic Spectra nTier300, Installation Manual

Page: 20 / 88

Chapter 2 – Installing the nTier300 VTL
20
5. Refer to Figure 2-7 to remove the drives, accessories, and nTier300 VTL chassis
from the shipping box. Place the chassis and the drives on your work surface.
Warning:
The nTier300 VTL weighs approximately 54 lb. (25 kg) without
drives installed. Use extreme caution when moving it. Always
use two people, one on each side, when lifting or moving it.
Warnung:
Die nTier300 VTL wiegt ca 25 kg., ohne Laufwerke installiert.
Verwenden Sie extreme Vorsicht walten lassen, wenn sie
abwandern. Benutzen Sie immer zwei Personen, eine auf jeder
Seite, beim Heben oder Fortbewegen.
Caution:
Leave the drives in their anti-static bags until you have
unpacked and installed the chassis in a rack. Always wear an
anti-static wristband attached to an unpainted metallic surface
when handling the drives. An anti-static wristband is included
with the accessories.
6.
Save the box, anti-static bags, and foam packaging in case you need to re-ship the
nTier300 VTL for any reason.
Figure 2-7 Unpacking the nTier300 VTL.
1. Remove top foam insert.
3. Remove the foam tray holding
the front cover, rack-mount kit,
power cables, anti-static kit, and
documentation.
4. Lift the nTier300 VTL
chassis (bagged) from the
internal box. Leave the
bottom foam insert in the
box.
2. Remove two foam inserts holding
the drives. The number of drives
depends on the configuration
ordered.