37
3
Using the nTier300 VTL
BlueScale Web Interface
This chapter describes how to use the BlueScale web interface and the blade operator
panels to configure and monitor the Spectra nTier300 VTL.
Powering On the Spectra nTier300 VTL
on page 37
Accessing the BlueScale Web Interface
on page 38
Using the BlueScale Web Interface
on page 40
Monitoring the Status of Components
on page 45
Viewing and Configuring IP Addresses
on page 48
Restarting or Shutting Down the nTier300 VTL
on page 50
Powering On the Spectra nTier300 VTL
To power on the nTier300 VTL, use a stylus or other similar non-conductive object to
press the recessed power button on the front panel (Figure 3-1).
Note:
If the front cover is installed, remove it as described in
Remove the
Front Cover
on page 55.
o
Figure 3-1
Press the recessed power button.
Power button
Summary of Contents for Spectra nTier300
Page 1: ...Spectra nTier300 Virtual Tape Library Appliance Installation Guide PN 90990034 Revision B...
Page 8: ...Contents 8 Notes...
Page 36: ...Chapter 2 Installing the nTier300 VTL 36 Notes...
Page 52: ...Chapter 3 Using the nTier300 VTL BlueScale Web Interface 52 Notes...
