PRO/100+
™
LAN Adapter Installation
SY-D6IGA
94
General Instructions
1. Install NetWare 3.11 according to the
NetWare 3.11 installation
manual.
2. Copy the
E100B.LAN
server driver and any updated
NLMs
to
the
NetWare server's hard drive.
l
If you can't log in to the server (before starting the server)
copy the
E100B.LAN
driver to the root directory of the
server's hard drive.
l
If you can log into the server, copy the files to the
SYSTEM
subdirectory. If you do this, you won't need to specify a
path on the load line. If you copy it to another directory,
make sure the
LOAD
statement includes the correct path.
3. Modify the server's
STARTUP.NCF
to pre-allocate server
buffers with the following:
SET MAXIMUM PHYSICAL RECEIVE PACKET SIZE = 2048 (or larger)
4. Start the server. At the server console, issue the load and bind
statement.
LOAD C:<PATH>\PATCHMAN
LOAD C:<PATH>\LSLENH
LOAD C:<PATH>\MSM
LOAD C:<PATH>\ETHERTSM
LOAD C:<PATH>\E100B SLOT=x FRAME=ETHERNET_802.3
BIND IPX TO E100B NET=xxxxxxxx
Where:
SLOT=x
specifies the
PCI device number.
Substitute
x
with the
valid value for the adapter. You will be prompted if you don't
specify a slot number.
NET=xxxxxxxx
is the unique network address for that LAN
segment.
The default frame type is
802.2.
If your workstations needs to
use the
802.3
frame type, see the section later in this document
about using multiple frame types on one adapter.