manualshive.com logo in svg

SOYO SY-D6IGA, Users Manual And Technical Reference, Page: 85 / 120

Share
Download
SOYO SY-D6IGA Users Manual And Technical Reference Download Page 85

PRO/100+

™

 LAN Adapter Installation

SY-D6IGA

81

Windows

®

 95 Installation Notes

Location of Driver: 

\NT\E100BNT.SY_ (NDIS 4.0 compressed)

Location of Setup File: 

\NET82557.INF

Determining Your Version of Windows 95

Follow the steps below to determine which version of Windows 95 is

running on your system:

1. Click on the [Start] button.

2. Select [Settings].

3. Select the [Control Panel].

4. Double-click on the [System] icon. The 

System Properties

dialog box opens.

5. Select the 

General

 tab. Information about your system is

displayed, including the version of Windows 95 you are running,

under 

System.

Advanced Configuration Parameters

An advanced configuration utility called 

PROSet

 was installed on

your system when you installed the PRO/100+ adapter. To start

PROSet,

 double-click on the [PROSet] icon in the Windows control

panel. For additional information, click [Help] in the 

PROSet

 window.

The defaults specified for the adapter work correctly for most

configurations. When making changes to any adapter settings, be

sure to use 

PROSet

 rather than the 

Advanced

 tab under 

Properties

in the Network control panel.

Summary of Contents for SY-D6IGA

























































































































Reviews:

No comments