PRO/100+
™
LAN Adapter Installation
SY-D6IGA
78
Windows
®
NT 4.0 Installation Notes
Location of Driver:
\ NT\E100BNT.SY_ (NDIS 4.0 compressed)
\OEMSETUP.INF
Note:
NT 4.0 ships with a driver for the
PRO/100B
adapter.
However, you
must
install the more recent driver from the
PRO/100+
adapter disk or CD.
General Instructions
After installing the adapter in the computer, you will need to
configure it under
Windows NT,
as instructed below:
1. Double-click the [Network] icon in the [Control Panel].
2. Select the
Adapter
tab.
3. Click [Add]. You will see a list of adapters.
4. Do
not
select an adapter from this list. Instead, insert the
PRO/100+ adapter disk or CD into the appropriate drive and
click [Have Disk].
5. Type
“D:\”
(for CD) or
“A:\”
(for floppy) in the dialog box and
click [OK]. Then follow the prompts to complete installation.
When the adapter is added you will see a new adapter listed in
the
Network Adapters
list.
6. Click [Close] to finish and configure any protocols as prompted.
7. Restart Windows NT when prompted.