PRO/100+
™
LAN Adapter Installation
SY-D6IGA
86
13. Choose [Yes To All] when
WFW
asks if you want to replace the
files currently installed with the versions you are installing now.
14. Insert the
WFW
disks, as required. If prompted for the NetWare
files, insert the
Novell
disk containing the drivers for the Novell
file
WINDR3.EXE.
If prompted for the path of
E100B.386,
insert the
Configuration
and Drivers
disk into a drive and for the path, type:
“A:\WFW”
or
“D:\WFW”
if using the CD-ROM.
If prompted for the path of
E100B.DOS,
specify:
“A:\DOS”
or
“D:\DOS”
if using the CD-ROM.
15. When finished updating the files,
WFW
reports that it modified
several files. Click on [OK].
WFW
changes your last drive to
P:
.
If you want to change this setting, do so in your
CONFIG.SYS
file.
WFW
also modifies your
NET.CFG
file (for NetWare users).
Check this file to make sure your frame types load in the correct
order for your network.
16. When
WFW
prompts you to restart your computer for the
changes to take effect, click on [Restart Computer].
Hints and Tips
General
1. If you are installing multiple
PRO/100
adapters in
WFW,
follow
the instructions above for installing each adapter. Then, enter
the adapter's
12-digit hexadecimal Ethernet address
in the
[IN$E100B]
and
[IN$E100B1]
sections of the
PROTOCOL.INI
file. (The Ethernet address is printed on a sticker placed on the
adapter. For dual-port adapters, increment the Ethernet
address by 1 for the Ethernet address of the second port.)