Hardware Setup
SY-D6IGA
8
2-2 UNPACKING THE MOTHERBOARD
When unpacking the motherboard, check for the following items:
Ø
The
SY-D6IGA
82440 GX AGP/PCI Motherboard
Ø
The
Quick Start Guide *
Ø
The Installation CD-ROM *
Ø
Three SCSI Driver Installation Diskettes
labeled “ 7800 Family Manager Set V3.02”
Ø
One DRM (Dual Retention Mechanism) Assembly
Ø
One IDE Device Flat Cable
Ø
One Floppy Disk Drive Flat Cable
Ø
One 50-pin Narrow SCSI Cable
Ø
One 68-pin Wide SCSI Cable
Ø
One 68-pin Ultra2 SCSI Cable with Terminator
* If your board comes with a driver disc and a paper manual, the Quick Start Guide
and the CD-ROM are not included in the package.
Warning:
Do not unpack the motherboard from its anti-
static packaging until you are ready to install it.
Like most electronic equipment, your motherboard may be damaged
by electrostatic discharge. To avoid permanent damage to
components ground yourself while working by using a grounding
strap. Otherwise, ground yourself frequently by touching the
unpainted portion of the computer chassis to drain the static
charges.
Handle the motherboard carefully, holding it by the edges.
You are now ready to start the installation.