Hardware Setup
SY-D6IGA
7
Chapter 2
HARDWARE SETUP
Congratulations on your purchase of
SY-D6IGA
Motherboard. You
are about to install and connect your new motherboard.
Note:
Do not unpack the motherboard from its protective anti-
static packaging until you have made the following preparations.
2-1 PREPARATIONS
Gather and prepare all the following hardware equipment to
complete the installation successfully:
1. Single or Dual Pentium
®
II
Xeon ™ & Pentium
®
III
Xeon™
processor with or without built-in CPU cooling fan.
Note:
Preferably use the CPU cooling fan & heat sink
assembly included with this motherboard.
2. DIMM memory module
3. Computer case and chassis with adequate power supply unit
4. Monitor
5. PS/2 Keyboard
6. Pointing Device (PS/2 mouse)
7. Speaker(s) (optional)
8. Disk Drives: HDD, CD-ROM, Floppy drive …
9. External Peripherals: Printer, Plotter, and Modem (optional)
10. Internal Peripherals: Modem and LAN cards (optional)
11. Internal SCSI Devices: Hard/Floppy/CD-ROM Drives,
Tape Drives, Removable Media Drives, etc.
(optional)