PRO/100+
™
LAN Adapter Installation
SY-D6IGA
80
Windows
®
98 Installation Notes
Location of Driver:
\E100BNT5.SY_ (NDIS 5.0 compressed)
Location of Setup File:
\NET82557.INF
Manually Adding an Adapter in Windows 98
If the
New Hardware Found
dialog box does not appear at startup
and you cannot connect to the network, check the
Device Manager
list to verify if the new adapter is present. If it is missing from the
Device Manager
list, follow these steps to configure the new
adapter:
1. From the [Control Panel], double-click the [System] icon.
2. Click the
Device Manager
tab.
3. Double-click [Other Devices] or [Network Adapters] in the list area.
4. Double-click a
PCI Ethernet Controller.
5. Click the
Driver
tab, then click [Update Driver].
6. Click [Next] at the
Update Device Driver Wizard.
7. Select
"Search for a better driver..."
and click [Next].
8. Insert the PRO/100+ adapter disk and select
"Specify a
location",
then enter the appropriate drive for your disk media
(
A:
,
D:\,
etc.), and Click [Next].
9. The
Update Wizard
displays the message that it has found the
driver
D:\ NET82557.INF
(where
D:
is your media drive). Click
[Next].
10. Click [Finish].
11. Now restart your computer.
Note:
At this point, you may be required to insert the Windows 95/98
CD. Insert the CD when prompted by the system.