PRO/100+
™
LAN Adapter Installation
SY-D6IGA
79
Windows
®
NT 3.51 Installation Notes
Location of Driver:
\E100B.SY_ (NDIS 3 compressed)
\OEMSETUP.INF
General Instructions
After installing the adapter in the computer, you will need to
configure it under
Windows NT,
as instructed below:
1. Double-click the [Network] icon in the [Control Panel].
2. Click the [Add Adapter] button.
3. Do
NOT
select an Intel adapter from the list. Instead, scroll to
the end of the list and select:
[Other]
(Requires disk from manufacturer.)
4. Click the [Continue] button.
5. Insert the Intel PRO/100+ disk or CD into the corresponding
drive, specify that drive, and click [OK].
6. Select the name that corresponds to the adapter you are
installing and click [OK].
7. Click [OK] in the
Network Settings
dialog. Other configuration
screens may appear. Configure as desired. When prompted,
restart Windows NT.
Note:
The NDIS 3 miniport driver will automatically get installed in
Windows NT 3.51.