PRO/100+
™
LAN Adapter Installation
SY-D6IGA
85
4. Click the [Drivers] button.
5. Click the [Add Adapter] button. Select [Unlisted or Updated
Network Adapter] and click on [OK].
6. Insert the adapter driver disk in the drive and specify the path
<drive>:\WFW
for the location of the driver.
7. Select the
“ Intel PRO/100+ PCI”
adapter from the list box and
click [OK].
8. Specify the correct speed for your network. If you are using the
TX-based adapter, specify the correct duplex mode. If you are
unsure of the correct settings, contact your Network
Administrator.
Notice 1:
If you set the PRO/100+ TX adapter to FULL duplex and
you are running at 100 Mbps, you must change your speed setting
to 100.
Notice 2:
These options will not come up if you already have the
NetWare ODI driver installed. These settings are set in the
NET.CFG
file.
9. The driver and default protocols will appear in the
Network
Drivers
window. If you need to add or remove a protocol, do so
here.
10. In the
Network Drivers
window, click [Close].
11. In the
Network Setup
window, click [OK].
12. In the
Microsoft Windows Network Names
window, enter a
unique user name, the name of your new or existing workgroup,
and a unique computer name for your workstation, then click
[OK].