PRO/100+
™
LAN Adapter Installation
SY-D6IGA
84
Windows
®
for Workgroups 3.11 Installation Notes
Location of Driver:
\WFW\E100B.38_
Location of Setup File:
\WFW\OEMSETUP.INF
General Instructions
Before You Begin:
If your adapter was shipped with a CD, create
an installation diskette from the CD before starting the installation
procedure. Put the CD into your CD-ROM drive and a blank
formatted diskette into a diskette drive. Run the
MAKEMS.BAT
from
the
MAKEDISK
directory on your CD. The command syntax is
MAKEMS <source drive> <destination diskette>.
Example:
MAKEMS D: A:
Note:
If you are running Novell NetWare on this workstation, see the
Novell NetWare
section of
Hints and Tips
below before continuing
with this installation.
Follow these steps, to perform the installation for Windows
Workgroups 3.11:
1. Double-click the [Network Setup] icon in the
Network Group.
2. If you are replacing a previous LAN adapter, click the [Remove]
button to delete that adapter.
3. Click the [Networks] button. Select [Install Microsoft Windows
Network] and click [OK].
Optional 1:
To add Novell NetWare support to this workstation, click
[Other], then select [Novell NetWare Shell 3.x] if you are using
NETX,
or select [Novell NetWare Shell 4.x] if you use
VLMs.
Click
[OK].
Optional 2:
To share files and printers on this workstation, click the
[Sharing] button, then click on [OK].