Sony UP-27MD Instructions For Use Manual Download

Page: 9 / 90

Caution

When you dispose of the unit or accessories, you

must obey the laws in the relative area or country

and the regulations in the relative hospital

regarding environmental pollution.

Warning on power connections

Use a proper power cord for your local power

supply.

1. Use the approved Power Cord (3-core mains

lead) / Appliance Connector / Plug with

earthing-contacts that conforms to the safety

regulations of each country if applicable.

2. Use the Power Cord (3-core mains lead) /

Appliance Connector / Plug conforming to the

proper ratings (Voltage, Ampere).

If you have questions on the use of the above

Power Cord / Appliance Connector / Plug, please

consult a qualified service personnel.

Guidance and manufacturer’s declaration – electromagnetic immunity

The UP-27MD is intended for use in an electromagnetic environment in which radiated RF disturbances

are controlled. Portable RF communications equipment should be used no closer than 30 cm (12 inches)

to any part of the UP-27MD. Otherwise, degradation of the performance of this equipment could result.

Immunity test

Band

Service

Modulation

IEC 60601

test level

Compliance

level

Proximity fields

from RF wireless

communications

equipment

IEC 61000-4-3

380 – 390 MHz TETRA 400

Pulse

modulation

18 Hz

27 V/m

430 – 470 MHz GMRS 460

FRS 460

±5 kHz

deviation

1 kHz sine

28 V/m

704 – 787 MHz LTE Band 13, 17

Pulse

modulation

217 Hz

9 V/m

800 – 960 MHz

GSM 800/900

TETRA 800

iDEN 820

CDMA 850

LTE Band 5

Pulse

modulation

18 Hz

28 V/m

1,700 –

1,990 MHz

GSM 1800

CDMA 1900

GSM 1900

DECT

LTE Band 1, 3, 4,

UMTS

Pulse

modulation

217 Hz

28 V/m

2,400 –

2,570 MHz

Bluetooth

WLAN

802.11 b/g/n

RFID 2450

LTE Band 7

Pulse

modulation

217 Hz

28 V/m

5,100 –

5,800 MHz

WLAN 802.11 a/n

Pulse

modulation

217 Hz

9 V/m

NOTE: These guidelines may not apply in all situations. Electromagnetic propagation is affected by

absorption and reflection from structures, objects and people.

a For some services, only the uplink frequencies are included.

Summary of Contents for UP-27MD



























































































Search results

Summary of Contents for UP-27MD

Reviews:

Related manuals for UP-27MD

Brands by name

Popular brands

Sony UP-27MD, Instructions For Use Manual

Search results

Summary of Contents for UP-27MD

Reviews:

Related manuals for UP-27MD

Brands by name

Popular brands