62
If you have already adjusted the color
balance, the previously adjusted values are
displayed.
To reset the values to the factory default
setting (50/50/5)
Align the cursor with each item and press the
and
buttons at the same time.
2
Press and hold the DISPLAY button and use
the
,
,
, or
button to decide the area
where you want to adjust the color balance.
(The [Color Balance] screen disappears
temporarily.)
3
Press the CAPTURE button.
The image captured in memory appears.
4
Select [Test Print], then press the EXEC button.
Nine identical images from the area selected
in step 2 are printed.
Each image has a different color balance.
(This print operation can also be performed by
pressing the PRINT button while the [Color
Balance] screen is displayed.)
Color changes in the test print are as follows.
5
Select the image which has the best color
balance from the printed results.
If you want to change the color balance after
you see the printout, adjust the color balance
again, referring to “To readjust the color
End : MENU
Color Balance
Bal X
Bal Y
Bal Step
Test Print
Back
50
50
5
[EXEC]
Currently setting values of X and Y axes and the amount
of change between color balance items ([Bal Step])
(example is factory default settings)
1
A
M
2ı
50
4
Color Balance
Bal X
Bal Y
Bal Step
Test Print
Back
50
50
5
[EXEC]
End : MENU
Yellowish
green
Yellowish
Orangish
Reddish
Standard
Greenish
Bluish green
Bluish
Reddish
purple
Summary of Contents for UP-27MD
Page 90: ......
