Sony UP-27MD Instructions For Use Manual Download

Page: 71 / 90

Select [All Reset], then press the EXEC button.

“All Reset” appears and all setting values on

the printer are returned to factory defaults.

Displaying the ink ribbon or printer

setting information

You can keep information such as the ink ribbon

type and remaining amount, set number of prints,

and reduced image settings on the video monitor

at all times.

Note

Use the remaining ribbon display as a guideline.

Display the [Output Setup] tab of the [User

Setup] screen.

Select [Information Display] and choose

whether or not to display information.

Ink ribbon type and remaining prints

Disabling message display

You can configure settings so messages are not

displayed on the video monitor.

Display the [Output Setup] tab of the [User

Setup] screen.

Select [Messages Display] and choose

whether or not to display messages.

Selecting controls using the device

connected to the REMOTE

connector

You can control the printer remotely using the

FS-24 Foot Switch (not supplied) connected to the

REMOTE connector on the rear panel of the

printer.

In [Remote Function] on the [Remote Setup] tab of

the [System Setup] menu, assign controls to the

foot switch connected to the REMOTE connector.

In addition, the printer can be remotely controlled

by a pulse signal input sent to the REMOTE

connector (page 78).

You can also control the printer remotely by

connecting a computer to the RS-232C connector.

Option

Description

All (default

value)

Displays printer setting information

(ink ribbon remaining prints,

captions, number of prints, current

memory pages, number of reduced

images, source/memory), and the

pointer (next position to capture).

Ribbon

Remain

Displays only ink ribbon information

(type and remaining level).

Off

Turns off all printer setting

information.

End : MENU

Backup

All Reset

Maintenance

[EXEC]

Initialize

Cleaning

Option

Description

On (default

value)

Displays messages.

Off

Hides messages.

2ı

Remaining

prints

Ink ribbon type

S: UPC-21S

L: UPC-21L

C: Cleaning ribbon

Summary of Contents for UP-27MD



























































































Search results

Summary of Contents for UP-27MD

Reviews:

Related manuals for UP-27MD

Brands by name

Popular brands

Sony UP-27MD, Instructions For Use Manual

Search results

Summary of Contents for UP-27MD

Reviews:

Related manuals for UP-27MD

Brands by name

Popular brands