Sony UP-27MD Instructions For Use Manual Download

Page: 86 / 90

Clearing a paper jam

If the ALARM indicator on the ribbon door panel

lights after printing starts, or if “Remove Paper” or

“Check Paper” appears on the printer window

display, a paper jam may have occurred inside the

printer.

If the message does not disappear after removing

the paper feed tray and reinserting it with paper

loaded inside, perform the following to clear the

jammed paper.

Press the



mark on the paper feed tray to

eject the tray.

Clear any paper that jammed part way

through printing.

If the paper jam is deep inside the printer and

cannot be cleared, open the ribbon door

panel and turn the dial upward. This ejects the

paper jammed deep inside.

If the paper jam cannot be cleared even by

turning the dial, refer to “If a paper jam cannot

be cleared” (page 86).

Load the paper properly.

Notes

• Do not reuse the paper removed in step 2.

• Only use paper from the printing packs

recommended for this printer.

Insert the paper feed tray into the printer

(page 21).

If a paper jam cannot be cleared

Follow the steps below to open the base plate on

the printer and clear the paper jam.

Caution

Do not touch any unit circuitry and the patient at

the same time.

If the unit malfunctions, it may generate voltage

that could be harmful to the patient.

Notes

• Before clearing a paper jam with the following

procedure, press the



POWER switch to turn off

the printer and also unplug the power cord from

the wall outlet.

• When turning the printer over, disconnect all

cords. Bending or twisting cables can damage

them and may cause a fire hazard or electric

shock.

• If it is necessary to touch internal printer parts to

remove a paper jam, be careful not to damage

the internal parts.

Press the



POWER switch to turn off the

printer, and then unplug the power cord and

connecting cables.

Eject the paper feed tray from the printer.

Remove any connected cords, then turn the

printer over.

Dial

Summary of Contents for UP-27MD



























































































Search results

Summary of Contents for UP-27MD

Reviews:

Related manuals for UP-27MD

Brands by name

Popular brands

Sony UP-27MD, Instructions For Use Manual

Search results

Summary of Contents for UP-27MD

Reviews:

Related manuals for UP-27MD

Brands by name

Popular brands