19
Note
Do not touch the white tabs on the sides of
the ribbon tray. Doing so may result in
improper loading of the ink ribbon.
4
Slide the ribbon tray straight into the printer
until completely inserted.
5
Close the ribbon door panel.
To remove the ribbon tray
To remove the ribbon tray when replacing the ink
ribbon, for example, pull the tray straight out.
If the ink ribbon tears during use
Cellophane tape, etc., can be used to repair a torn
ink ribbon so that the remainder of the ribbon can
be used. Wind the ink ribbon until the cellophane
tape is no longer visible by turning the black (or
gray) gear at the winding end in the direction of
the arrow. (Make sure the ink ribbon does not
sag.)
Tab
Cellophane tape
Summary of Contents for UP-27MD
Page 90: ......