Sony UP-27MD Instructions For Use Manual Download Page 10

Page: 10 / 90

Warning on power connections for

medical use

Customers in the U.S.A. and Canada should use

the following type of power cord.

Customers in other countries or regions should

use the power cord prescribed by their country or

region.

* Note: Grounding reliability can only be achieved

when the equipment is connected to an

equivalent receptacle marked “Hospital Only” or

“Hospital Grade”.

Caution

Do not use the device in a MR (Magnetic

Resonance) environment.

It may cause a malfunction, fire, and unwanted

movement.

U.S.A. and Canada

Plug type

HOSPITAL GRADE

Cord type

Min. Type SJT
Min. 18 AWG

Minimum rating for plug

and appliance couplers

10 A / 125 V

Safety approval

UL Listed and CSA

For the customers in the U.S.A.

SONY LIMITED WARRANTY

- Please visit

http://www.sony.com/psa/warranty for

important information and complete terms and

conditions of Sony’s limited warranty applicable

to this product.

For the customers in Canada

SONY LIMITED WARRANTY

- Please visit

http://www.sonybiz.ca/pro/lang/en/ca/

article/resources-warranty for important

information and complete terms and conditions

of Sony’s limited warranty applicable to this

product.

For the customers in Europe

Sony Professional Solutions Europe - Standard

Warranty and Exceptions on Standard Warranty.

Please visit https://pro.sony/support-services/

primesupport/support-professional-solutions-

europe-standard-product-warranty for

important information and complete terms and

conditions.

For the customers in Korea

SONY LIMITED WARRANTY

- Please visit

http://bpeng.sony.co.kr/handler/BPAS-Start for

important information and complete terms and

conditions of Sony’s limited warranty applicable

to this product.

Summary of Contents for UP-27MD



























































































Search results

Summary of Contents for UP-27MD

Reviews:

Related manuals for UP-27MD

Brands by name

Popular brands

Sony UP-27MD, Instructions For Use Manual

Search results

Summary of Contents for UP-27MD

Reviews:

Related manuals for UP-27MD

Brands by name

Popular brands