66
Registering Local Information
When “Link to Audio Input” is set to “On”,
“Audio Input”, “Input Select (MIC)” and
“Input Select (AUX)” on the Basic Setup1
page of Audio setup menu cannot be selected.
Video Input
Allows you to select the video input.
Camera:
Selects the camera picture from
the built-in camera.
RGB:
Selects the picture from the external
equipment connected to the RGB IN
connector.
Audio Input
Allows you to select the audio input which is
linked to the video input selected in “Video
Input” when “Link to Audio Input” is set to
“On”.
MIC:
Inputs audio from the microphone.
AUX:
Inputs audio from the external
equipment.
MIC+AUX:
Inputs audio both from the
microphone and external equipment.
Input Select (MIC)
Input Select (AUX)
Allows you to select the audio input from the
microphone and/or external equipment
when “Link to Audio Input” is set to “On”.
The options that can be selected vary with
the Audio Input setting.
When you select “MIC”, you can select one
of the following three options. When you
select “AUX”, “AUDIO” is selected. When
you select “MIC+AUX”, you can select the
“MIC (Camera)” or “MIC (A1/A3)” option
for MIC, and “AUDIO” is selected for AUX.
MIC (Camera):
Select to use the
microphone that is built into the camera
portion of the system.
MIC (A1/A3):
Select use of the PCS-A1
microphone (not supplied) or PCSA-A3
microphone (not supplied) connected to
the MIC (A1/A3) jacks on the
Communication System.
AUDIO:
Select to input the audio of
external equipment connected to the
AUDIO IN jack on the Communication
System.
The LAN setup menu is used to set up LAN
connection.
For details about the settings, consult your
network administrator.
The contents of the LAN setup menu vary
depending on the “Internet Protocol” setting in
the Administrator setup menu.
The page numbers also vary according to the
number of setting items.
Basic Setup:
LAN1
Host Name
Enter your host name (up to 30 characters).
DHCP Mode
Allows you to select whether the Dynamic
Host Configuration Protocol (DHCP) server
is enabled.
Auto:
The IP address, network mask,
gateway address and DNS address are
automatically assigned.
Off:
Disables the DHCP server. In this case,
enter an IP address, network mask,
gateway address and DNS address.
Prefix Length
Configure the prefix length of the IPv6
address within the range of 0 to 128.
IP Address
Enter the IP address.
Network Mask
Enter the network mask.
Gateway Address
Enter the default gateway address.
Primary DNS
Enter a primary DNS address.
Secondary DNS
Enter a secondary DNS address.
Note
LAN Setup Menu
Note
LAN
Summary of Contents for PCSXL55
Page 261: ...Sony Corporation ...
