58
Registering Local Information
The Answer setup menu is used to set up call
reception.
Answer
Auto Answer
Allows you to select whether the system
answers calls automatically.
On:
Answers calls automatically. When a
call comes in, the line is automatically
connected.
Off:
Allows you to answer calls manually.
When a call comes in, the phone rings. If
you select “OK” in the “Answer?”
message, the line is connected.
ISDN MSN
Allows you to select whether you are using
the Multiple Subscriber Number.
Off:
Select when you do not use the
Multiple Subscriber Number.
On:
Select when you use the Multiple
Subscriber Number.
Mic on Answer
Allows you to select whether to transmit
audio from your site when you receive a call
and connect it.
On:
Enables transmission of audio when
answering a call.
Off:
Disables transmission of audio when
answering a call.
For details, see “Turning Off the Sound
Momentarily – Muting Function” on page
123.
Reject Answer
Allows you to select whether to connect a
remote party’s calling during
communication.
On:
Disables the connection of a remote
party.
Off:
Enables the connection of a remote
party.
The Multipoint setup menu is used to set up
multipoint connection
when the local
system is used as the main terminal
.
Multipoint
Multipoint Mode
AUTO:
Switches from point-to-point
connection to multipoint connection
automatically.
On:
Enables you to make a multipoint
connection at any time.
Broadcast Mode
Allows you to select the broadcast mode.
Split:
Displays the picture from the
connected terminals in split windows.
Voice Activate:
Detects the terminal where
a speaker has the loudest voice, and
automatically transmits the picture of
this terminal to all other terminals.
Voice Activate (720P):
Enables
transmission of pictures with resolution
of 720p (1280 × 720 pixels) in H.264
Video Mode when “Voice Activate”
mode is activated.
• The “Voice Activate (720P)” mode cannot
be selected when the communication is made
via an ISDN or SIP connection. Even for an
IP connection, this mode is not available if
the remote party does not support H.264
Video Mode.
• When “Broadcast Mode” is set to “Voice
Activate (720P)”, you cannot change
“Broadcast Mode” during communication.
Select the Broadcast Mode before starting
communication.
Split
Allows you to select the type of split display
used to display local and remote pictures on
a single monitor during a multipoint
connection.
Four-screen Mosaic:
The display is split
into four parts.
Six-screen Mosaic:
The display is split into
six parts.
Answer Setup Menu
Answer
Multipoint Setup Menu
Notes
Multipoint
Summary of Contents for PCSXL55
Page 261: ...Sony Corporation ...
