59
Registering Local Information
C
h
a
p
te
r 2:
R
e
gi
s
tr
a
tio
n
an
d Se
tu
p
fo
r Sy
s
tem
A
d
m
in
is
tr
a
to
rs
When there is only one terminal connected, the
display switches to full screen regardless of the
selection of the setting.
The Communication setup menu is used to
set up communications.
The contents of the Communication setup
menu vary with “Line Interface” setting in the
Line I/F setup menu, or “Individual Settings for
Transmission/Reception” or “Individual
Settings for Point-to-Point/Multipoint” setting
in the Communication setup menu. Only the
settings that can be configured will appear on
the screen.
The Communication page number after the
Communication2 page also varies according to
the number of setting items.
IP
The menu is used to set up the
communication mode for the IP connection.
Individual Settings for Transmission/
Reception
Allows you to select whether to configure
the IP settings for transmission and
reception individually.
Off:
Select to configure the IP settings for
transmission and reception commonly.
On:
Select to configure the IP settings for
transmission and reception individually.
Individual Settings for Point-to-Point/
Multipoint
Allows you to select whether to configure
the IP settings for a point-to-point
connection and multipoint connection
individually.
Off:
Select to configure the IP settings for
both connections commonly.
On:
Select to configure the IP settings for a
point-to-point connection and
multipoint connection individually.
The setting items and page numbers in the IP:
Mode page vary according to the setting of
“Individual Settings”.
IP: Mode
Total Bandwidth
Allows you to select the total bandwidth to
be used with this system.
In multipoint connection, the total
bandwidth of all points is displayed.
You can select from among 128Kbps,
384Kbps, 512Kbps, 1Mbps, 2Mbps, 3Mbps,
4Mbps, and Other.
In multipoint connection, the actual
Communication Bit Rate for each point is
automatically adjusted so as not to exceed
“Total Bandwidth”.
Communication Bit Rate
Allows you to select the communication bit
rate per point.
When “Individual Settings for
Transmission/Reception” or “Individual
Settings for Point-to-Point/Multipoint” on
the IP page is set to “On”, you can set this
item for transmission and reception, and
point-to-point and multipoint connections
individually.
You can select from among 128Kbps,
384Kbps, 512Kbps, 1Mbps, 2Mbps, 3Mbps,
4Mbps and Other.
Audio Mode
Allows you to select the compression format
of audio to be sent to a remote party.
When “Individual Settings for
Transmission/Reception” or “Individual
Settings for Point-to-Point/Multipoint” on
the IP page is set to “On”, you can set this
item for transmission and reception, and
point-to-point and multipoint connections
individually.
You can select multiple formats from among
G.711, G.722, G.728 and MPEG4 (MPEG4
AAC).
Note
Communication Setup Menu
Note
Communication
Note
Note
Communication
Summary of Contents for PCSXL55
Page 261: ...Sony Corporation ...
