37
Turning the System On/Off
C
h
apt
er
1:
In
st
al
la
tio
n
and
Pr
e
par
at
io
n
1
Press the
@
/
1
(power) switch on the Communication System.
The message “Power off?” appears on the monitor screen.
2
Press the
V
,
v
,
B
or
b
button on the Remote Commander to select “Power
off”, and press the ENTER button.
You can power off the system by pressing the
@
/
1
(power) button on the
Remote Commander.
The system turns off.
3
Turn off the power of other equipment used for the communication.
• Turn off the power switch on the Communication System when the system will not
be used for an extended period. While the power switch is off, you cannot receive a
call from a remote party.
• Be sure to unplug the power cord after the power of the system is turned off
completely.
• If the system is unplugged for about 10 days or longer, the clock setting of the system
may be reset. In this case, re-set the date and time in the Clock Set page of the General
setup menu.
1
Press the /- buttons on the Remote Commander to set the
volume to a level where the remote party can be clearly heard.
You can connect an external microphone and headphones for use with the
Communication System.
For details on using external microphones and headphones, see “Using
External Microphones and Headphones” on page 153.
When connected to a computer, the Communication System can be used as a
computer display.
Connect the computer to the RGB IN connector, and press the PC/RGB button
on the right side of the system to enable use as a computer display.
Turning Off
Notes
Adjusting the Volume
Connecting External Microphones and Headphones
Using the System as a Computer Display
11
Summary of Contents for PCSXL55
Page 261: ...Sony Corporation ...
