132
Selecting the Input Picture and Sound
Selecting the Input Picture and Sound
You can switch the picture displayed on the monitor screen, and switch
between the input picture and audio.
When the displayed picture on the monitor can be switched during
communication, pressing the LAYOUT button on the Remote Commander
displays the indication “F1: Switches the monitored picture between the
remote and local sites.” at the bottom of the monitor.
Each press of the F1 button on the Remote Commander switches the displayed
picture between those on the local and remote sites.
1
Press the VIDEO INPUT button on the Remote Commander.
The Video Input > Near menu appears.
2
Use the
V
,
v
,
B
or
b
button on the Remote Commander to select the video
input on the local site, then press the ENTER button.
The picture input from the selected equipment is displayed on the monitor
screen.
CAMERA:
Selects the camera picture from the built-in camera.
RGB:
Selects the picture from the equipment connected to the RGB IN
connector.
3
To store the selected input in the memory of the system, use the
V
,
v
,
B
or
b
button on the Remote Commander to select “Save”, then press the
ENTER button.
The Video Input menu disappears.
The stored video input is not deleted even after the system is turned off, and
is selected when the power is turned on again.
Switching the Displayed Picture between the Local and Remote
Pictures
Selecting the Input Picture
Save
Cancel
RGB
CAMERA
Video Input > Near
Summary of Contents for PCSXL55
Page 261: ...Sony Corporation ...
