65
Registering Local Information
C
h
a
p
te
r 2:
R
e
gi
s
tr
a
tio
n
an
d Se
tu
p
fo
r Sy
s
tem
A
d
m
in
is
tr
a
to
rs
Ringer Tone
Allows you to select the volume of a ring
tone when you receive a call from among
“Loud”, “Medium” and “Quiet”. You can
also select “Off” for the ring tone not to be
output.
The Video setup menu is used to set up video
input/output.
Basic Setup
Video Input
Allows you to select the video input.
Camera:
Selects the camera picture from
the built-in camera.
RGB:
Selects the video signal from the
external equipment connected to the
RGB IN connector.
Presentation Screen
Allows you to select the display pattern of
the presentation screen.
The “Presentation Screen” settings are
enabled when “H.239” is disabled during the
communication.
Full Screen:
Sends the computer picture,
etc. from the external equipment
connected to the RGB IN connector in
full screen mode.
PandP:
Sends the computer picture, etc.
from the external equipment connected
to the RGB IN connector and the
selected input picture such as a camera
picture in PandP mode.
Side by Side:
Sends the computer picture,
etc. from the external equipment
connected to the RGB IN connector and
the selected input picture such as a
camera picture in Side by Side mode.
Monitor Output
Allows you to select the video signal output
from the Communication System.
Single:
Outputs the video signal to the
system’s monitor.
Dual:
Outputs the video signal to both the
system’s monitor and the external
device connected to the RGB OUT
connector.
RGB Monitor Output Format
Allows you to select the format of the signal
output from the RGB OUT connector.
SXGA:
Outputs the SXGA signal.
XGA:
Outputs the XGA signal.
WXGA:
Outputs the WXGA signal.
Blanking Period
Allows you to select the duration of the
blackout period that occurs temporarily on
the monitor of the Communication System
when the input picture is switched.
You can select among from Long, Medium
and Short.
Custom Input
Label
Allows you to set the names of the selected
video inputs using up to 12 characters.
Custom Input Label (Camera)
Selects when “Camera” is selected in
“Video Input”.
Custom Input Label (RGB)
Selects when “RGB” is selected in “Video
Input”.
Link to Mic
Allows you to select whether to link an
audio input to the selected video input.
Link to Audio Input
Allows you to switch the audio input in
conjunction with switching the video input
by linking each video input and a specific
microphone or other audio input.
Off:
Switches the video input and the
microphone or other audio input
separately.
On:
Links switching of the video input and
the microphone or other audio input.
Video Setup Menu
Video1
Video2
Video3
Summary of Contents for PCSXL55
Page 261: ...Sony Corporation ...
