5-222
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
Screw
(PWH3
x
6)
TC-96 board
CN100
CN200 CN300
CN1
CN25
CN140
5-32-15. TC-96 Board
Replacement
1.
Turn off the power.
2.
Remove the upper lid.
(Refer to Section 2-3-1 in Maintenance
Manual Part 1.)
3.
Remove the plate MD assembly.
(Refer to Section 2-4 in Maintenance Manual
Part 1.)
4.
Remove the screw as shown in the figure.
n
Pay attention not to fall the screw upon the
mechanical deck.
5.
Lifting the TC-96 board, and disconnect the
harnesses from the connectors (CN100,
CN200, CN300, CN1, CN25, and CN140) on
the TC-96 board.
Then remove the TC-96 board.
6.
Install the TC-96 board in the reverse order
of steps 2 through 5.
Adjustment after Replacement
7.
Perform the electrical adjustments or checks
of the time code system.
(Refer to Section 3-11.)
5-32-15. TC-96 Board
