5-183
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
A
Press
Set screw
Motor joint
Casstte compartment motor
Cassette compartment motor
Spec. : 3.8 mm
<
A
<
4.2 mm
Motor joint
Cassette compartment motor
+
marking
Harness (gray)
Harness (red)
Installation
6. Harness Soldering
Solder the harness disconnected in (2) of step 5 to
a new motor.
n
Solder a red harness to marking “
+
” of the motor.
7. Motor Joint Installation
(1) Pass the motor joint through the shaft of the
motor and temporarily tighten the set screw.
(2) Confirm that the clearance between the motor
joint and motor satisfies the specification
when the motor joint is pushed toward the
motor and tighten the set screw.
Tightening torque: 60
x
10
_
2
N
.
m
{6 kgf
.
cm}
Harness Soldering
Motor Joint Installation
5-29. Cassette Compartment Motor Replacement
