5-121
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
Threading ring
Portion A
Surface B
Roller
Drawer guard
Threading ring
Surface B
Roller
.
Threading
.
Untherading
Spec. 4 : At the threading state, the lower surface
of the roller does not touch with the surface
B of the threading ring.
Spec. 5 : At the unthreading state, the lower surface
of the roller does not touch with the surface
B of the threading ring.
11. T Drawer Assembly Operation
Confirmation
(1) Confirm that portion A of the threading ring
is securely pushing the roller and drawer
guard of the T drawer assembly during
threading. Moreover, confirm that the lower
surface of the roller does not touch with the
surface B
(
portion in the figure) of the threading
ring at that time. (Specification 4)
If specification 4 is not satisfied, adjust the
height and vertical play of the T drawer arm.
(Refer to step 9.)
(2) Confirm that the roller of the T drawer
assembly smoothly moves along the inside of
the threading ring during unthreading.
Moreover, confirm that the lower surface of
the roller does not touch with the surface B
(
portion in the figure) of the threading
ring at that time. (Specification 5)
If specification 5 is not satisfied, adjust the
height and vertical play of the T drawer arm.
(Refer to step 9.)
Adjustment after Replacement
12. Slant Guide Slantness Adjustment
Refer to Section 5-18-2.
5-18-1. T Drawer Arm Replacement
T Drawer Assembly Operation Confirmation
