57
a)
b)
Figure 40 – Removing the side lids and plate
3 – To place the pellets’ output on the right side of the storage unit,
loosen both screws shown in Figure 41-a (you don’t need to remove
them completely), and rotate the channel upper assembly (including
the drive’s assembly) clockwise. Once the procedure is completed,
retighten the two screws.
a)
b)
Figure 41 – Worm drive set rotation
4 – Afterwards, you must slide the worm drive channel to the right side of
the storage unit (Figure 42-a), by lifting it up and rotating it clockwise
so that it fits the base aligned diagonally with the holes (Figure 42-b).
Summary of Contents for SZM A 18 KW
