SOLZAIMA SZM A 18 KW, Instruction Manual

Page: 45 / 94

42
Together with the storage unit a connection kit to the boiler is provided
and it includes:
- Instruction manual;
- Storage unit instruction manual;
- Flexible hose with metal bracket to connect the storage unit to the
boiler;
- Cable to connect the storage unit level sensor and Pellet level sensors
for the boiler’s internal tank to the circuit board;
- Cable for electrical connection of the deposit;
- Ramp to put inside the boiler’s tank;
- Parts for the rear and lateral fixation of the storage unit to the boiler;
- Screws for attaching the level sensors to the tank of the boiler.
Description of operation
When the level sensors of the boiler’s internal tank ceases to detect
pellets (the sensor lights go off) the electric power engine of the storage
unit is triggered, by rotating the worm drive screw of the storage unit.
Thus the pellets are transported from the storage unit to the boiler’s
internal tank. The electric power engine will run continuously until the
sensors in the boiler’s tank detect pellets again (sensor lights turn on).
When this happens, the electric power engine stops.
Thus, the storage unit system will be triggered each time the pellets
level in the boiler’s tank is low, preventing the boiler’s flame is
extinguished due to the lack of pellets.
In the storage unit, there is also a sensor that detects the level of
pellets. When the pellets level is low, the sensor will cease to detect the
pellets (the sensor light goes off) and will appear on the display a
message of troubleshooting. After 40 seconds will appear on the boiler’s
display na alarm signal (code A15) and the boiler shuts down. The electric
power engine keeps running, fueling the boiler’s internal tank until the
sensors detect pellets.
To restart the boiler, you will have to refill the storage unit with pellets