46
4 – You should put some pellets in a container, and next to the boiler,
perform the sensitivity adjustment, as described in the following steps:
- put the sensor over the pellets;
Figure 26 – Placement of the sensor over the pellets
- Rotate the adjustment knob counter clockwise so that the lights go out
(if they are not already out) -
a)
b)
Figure 27-a – and then, slowly rotate clockwise until the lights come on -
Summary of Contents for SZM A 18 KW
