38
3 – Turn on the unit and close the lid of the reservoir, pressing down as
shown in Figure 15.
17.
Installation and operation using remote
command (chrono-thermostat) – not included
with the boilers
The pellet-run boilers are mass produced with a command display.
Alternatively, the units can be operated using a generic remote command
unit (chrono-thermostat). Note: the remote command unit normally
comes accompanied by a manual. An interface must be installed in order
to use the remote command (17–c).
a)
b)
c)
Figure 17 – Remote command unit (chrono-thermostat) and connection interface –
both not included.
Summary of Contents for SZM A 18 KW
