Thank you for purchasing a SOLZAIMA unit.
Please read this manual carefully and retain it for future reference.
* All products here detailed meet the requirements of the EU Construction
Products Regulation (Reg. No. 305/2011) and meet EC;
conformity
approval.
* The pellet-run boilers are manufactured in compliance with European
standard EN 303-5:2012.
* SOLZAIMA is not responsible for any damage to units installed by non-
qualified personnel;
* SOLZAIMA is not responsible for any damage to units not installed and
used in compliance to the instructions included in this manual;
* All local regulations, including but not limited to national and European
standards, must be observed when installing, operating and servicing the
unit;
* For assistence, please contact the unit’s supplier or installer. Remember
to provide the serial number of your boiler, which is detailed on the
identification plate located on the back panel of the unit, as well as on the
sticker found on the plastic cover of this manual.
*The technical service must be performed by the unit Installer or Supplier,
except on situations where the assessment performed by the installer or
service engineer determines that SOLZAIMA should be contacted, if
required.
contact technical assistance
www.solzaima.pt
Morada: Rua dos Outarelos; nº 111;
3750-362 Belazaima do Chão
Águeda – Portugal
Summary of Contents for SZM A 18 KW
