SoftBank Aquos Keitai, User Manual

Page: 15 / 176

13
Getting Started
AQUOS ケータイ
Insert Micro USB plug of AC Charger into External Device Port
・Insert Micro USB plug in correct orientation; otherwise,
External Device Port may be damaged. Check contours and
orientation of Micro USB plug, then insert it with tabs (○)
facing down.
Extend blades and plug AC Charger into AC outlet
Charging starts and Notification Lamp illuminates.
・Notification Lamp goes out when charge is full.
After charging, remove Micro USB plug from External Device
Port, then unplug AC Charger and retract blades
Charging with Desktop Holder
Desktop Holder and AC Charger are optional accessories. Be
sure to use Desktop Holder SHEFN1 or AC Charger SB-AC13-
HDMU specified by SoftBank Corp.
For information on other peripheral devices, see SoftBank
Website.
・See User Guide for Desktop Holder SHEFN1 or AC Charger
SB-AC13-HDMU.
・Never connect Micro USB plug while Desktop Holder or AC
Charger is wet.
・Do not place handset in Desktop Holder if wet.
Insert Micro USB plug of AC Charger in Desktop Holder
・Insert Micro USB plug in correct orientation; otherwise,
Desktop Holder port may be damaged. Check contours and
orientation of Micro USB plug, then insert it with tabs (○)
facing down.
Extend blades and plug AC Charger into AC outlet
Place handset in Desktop Holder
Charging starts and Notification Lamp illuminates.
・Push down handset until it clicks into place.
・Notification Lamp goes out when Battery is full.