SoftBank 206SH, User Manual

Page: 124 / 130

122
Precautions
・Do not subject handset to soap, detergent, bath powder/oil,
sea/pool/spa water, hot water, etc.
・Rinse off sea/pool water, beverage, dirt, sand, mud, etc.
immediately with fresh/tap water between 5
o
C - 35
o
C;
residue may cause malfunction if allowed to dry.
・Rinse off sand, dirt, etc. completely before use; any residue
may damage handset causing malfunction.
・Do not soak handset in bath or pool; never use it in water
(including key operation).
・Handset is not resistant to water pressure. Avoid high-
pressure water/shower (over 6 liters/min.) or water
immersion.
・Do not expose handset to extreme humidity for long
periods; avoid prolonged use in bath/shower rooms.
・Do not use in saunas. Avoid hot air from dryers or other
sources.
・Use handset within 5
o
C - 35
o
C (up to 40
o
C for brief
periods in bathrooms, shower rooms, etc.) and 35% - 90%
humidity.
・Avoid extreme temperature (near stoves, inside
refrigerators, etc.).
・Volume may be low when Mic, Earpiece or Speaker is wet;
dry handset before use (see " Drying Handset ").
・Charger, Desktop Holder and optional accessories are not
water or dust proof. Avoid moisture (precipitation, bath/
shower, etc.); may cause fire, electric shock or damage.
・Do not subject handset to strong impact; do not poke Mic,
Earpiece, Speaker, etc. with a cotton swab or sharp object;
water resistance may be affected.
・Avoid placing handset directly on sand. Sand may penetrate
Earpiece, Speaker, etc., resulting in low volume.
・Touchscreen may not respond properly if wet or touched
with wet fingers.
・Do not move handset directly from a cold place to a warm
humid place; condensation may occur. Should this happen,
dry handset naturally at room temperature.
・Handset does not float on water.
・Keep handset out of heavy rain.
・Do not let liquid-exposed handset remain wet; exposure to
cold may freeze liquid causing malfunction.
・Damaged Card Slot Cover affects water resistance; contact
a SoftBank Shop.
Charging Precautions
・Never charge handset while it is wet; may cause fire,
malfunction or burns due to electric shock or short
circuiting. Be sure to dry it before use.
・Do not touch Desktop Holder or Charger with wet hands.
Electric shock may occur.
・Do not use Desktop Holder or Charger in rooms in which
water is regularly in use (kitchens, bathrooms, shower
rooms, etc.); may cause fire or electric shock.
・If External Device Port or Charging Terminals are exposed to
liquid, never charge handset; follow these steps first:
1 Holding handset firmly by its sides, shake it about 20
times
2 Pat against dry cloth to remove moisture from External
Device Port or Charging Terminals
3 Leave handset on dry cloth for approximately 2 - 3 hours
at room temperature
Care & Maintenance
・Proper care of Card Slot Cover gasket is crucial for
continued handset water resistance. Observe the following:
・Do not remove or damage gasket. Keep it clean.
・Do not insert sharp objects into Card Slot Cover gap,
Headphone Port or External Device Port; may damage gasket
and affect water resistance.
・If Card Slot Cover is damaged or deformed, contact a
SoftBank Shop.
・To maintain water resistance, replace Card Slot Cover every
2 years regardless of its condition. Customer-requested
Card Slot Cover replacement incurs fees and requires
handset submission. For details, contact a SoftBank Shop or
SoftBank Customer Support,
General Information .
Washing Handset
Wipe off dirt, sand, beverage, etc., gently with a cloth. Then
hold handset approximately 10 cm below faucet or shower
head and wash with low-pressure tap water (6 liters/min. or
lower) at room temperature (5
o
C - 35
o
C). Wash with your
hands, taking care not to open Card Slot Cover; do not use a
brush or sponge. Dry handset before use; after drying it well,
power on.
・Before washing handset, make sure that Card Slot Cover is
closed firmly.
・Do not use a washing machine or ultrasonic cleaner.
・Headphone Port and External Device Port tend to accumulate
dust, sand, etc.; rinse and dry them completely before use.
Any residue may cause malfunction, burns or fire.
・Do not put a cotton swab, cloth, etc. into Headphone Port
or External Device Port; water resistance may be affected
causing malfunction.
・Do not place handset in a microwave oven to dry it. Internal
Battery/handset may leak, burst, overheat or ignite; may
cause malfunction, accident or injury.
・Do not dry handset using extreme heat (hot air from dryers
or other sources); may cause warping, discoloration or
damage.