SoftBank 206SH, User Manual

Page: 117 / 130

115
Safety Precautions
SoftBank 206SH
Wi-Fi (Wireless LAN)
Wireless LAN (hereafter "Wi-Fi") uses radio waves to enable
communication between compatible devices within range.
However, it is advisable for the user to configure security
settings to avoid risk of data interception.
・Do not use Wi-Fi near electrical appliances, audiovisual
equipment or office automation equipment; may affect Wi-
Fi transmission speed, availability, clarity, etc. (Especially
when a microwave oven is in use.)
・If there are multiple access points nearby, handset may not
detect access points correctly.
■Precautions
The frequency band utilized by handset Wi-Fi is shared with
industrial, scientific or medical equipment, including household
microwave ovens, and used by radio stations, amateur radio
stations, etc. (hereafter "other radio stations").
1 Before using Wi-Fi, visually check that no other radio
stations sharing the same frequency band are in use nearby.
2 Should interference occur between handset and other radio
stations, move or disable Wi-Fi immediately.
3 For additional information and support, contact SoftBank
Customer Support, General Information: From a SoftBank
handset, call toll free at 157. To call toll free from a
landline/IP phone, see "
Customer Service ."
Frequency Band
This radio station utilizes 2.4 GHz band and 5 GHz band with
DSSS-OFDM modulation. Maximum transmission radius is 40
meters.
To view related information (Japanese):
In application sheet,
(Settings) Device info
Authentication
Available Channels in the 5 GHz Band
Three bands are available within the 5 GHz frequency band:
5.2 GHz, 5.3 GHz and 5.6 GHz (W52/W53/W56).
・W52 (5.2 GHz band; channels 36, 38, 40, 44, 46, 48)
・W53 (5.3 GHz band; channels 52, 54, 56, 60, 62, 64)
・W56 (5.6 GHz band; channels 100, 102, 104, 108, 110, 112,
116, 118, 120, 124, 126, 128, 132, 134, 136, 140)
Using the 5.2 GHz or 5.3 GHz band (W52/W53) for outdoor
communication is prohibited by the Radio Law.
■Simultaneous Use with Bluetooth
®
Wi-Fi (IEEE 802.11b/g/n) and Bluetooth
®
transmit on the 2.4
GHz band. Enabling handset Bluetooth
®
or using Bluetooth
®
devices near handset may affect Wi-Fi transmission speed,
availability and clarity. Should interference occur, cancel
handset Bluetooth
®
or discontinue Bluetooth
®
device use.
・Handset supports Wi-Fi channels 1 - 13. Handset does not
connect to access points set to other channels.
・Available channels vary by country.
・For use of Wi-Fi aboard aircraft, check with airline
beforehand.
・In some countries/regions, such as France, there are
restrictions on the use of Wi-Fi. Check the local laws and
regulations before using Wi-Fi on handset abroad.
Bluetooth
®
Function
SoftBank Mobile Corp. is not liable for any damages resulting
from data/information leakage due to use of handset
Bluetooth
®
function.
■Precautions
The frequency band utilized by handset Bluetooth
®
function
is shared with industrial, scientific or medical equipment,
including household microwave ovens, and used by radio
stations, amateur radio stations, etc. (hereafter "other radio
stations").
1 Before using Bluetooth
®
, visually check that no other radio
stations sharing the same frequency band are in use nearby.
2 Should interference occur between handset and other radio
stations, move or cancel Bluetooth
®
function immediately.
3 For additional information and support, contact SoftBank
Customer Support, General Information: From a SoftBank
handset, call toll free at 157. To call toll free from a
landline/IP phone, see "
Customer Service ."
Frequency Band
This radio station utilizes 2.4 GHz band. FH1 indicates FHSS
modulation with maximum transmission radius of 10 meters.
XX4 indicates a different modulation scheme with maximum
transmission radius of 40 meters. It is not possible for the
radio station to avoid using the frequency band of a mobile
unit identification apparatus.
To view related information (Japanese):
In application sheet,
(Settings) Device info
Authentication
MHL Connection
Mirror Display contents to other devices by connecting
handset to Mobile High-Definition Link (MHL) compatible
devices with an MHL cable (sold separately). (MHL connection)
Handset charges through connected devices.
Remember these points when using MHL connection:
・Handset may power on automatically upon MHL connection;
avoid connection aboard aircraft or in hospitals, etc. where
mobile phone use is prohibited.
・Handset may not charge adequately depending on MHL cable
and connected device. Use AC Charger whenever possible.
・MHL connection may be unavailable depending on handset
application.
・Full Seg and One Seg cannot be received during MHL
connection. Remove MHL cable from handset when watching/
recording programs with Full Seg or One Seg.
・MHL connection is exclusively for use in Japan.